Page 140 - Mercury Lighting | Fluorescent Catalog
P. 140

SPECIFICATIONS:
• Speci cation grade, heavy-duty linear Slimline-T8 or HO-T8  uorescent open lamp industrial type luminaire. One-piece welded 20GA housing stands up to vibrations and other envi- ronmental factors. A one-piece deep symmetrical re ector shields and controls the lamp output.
• Applications: Use for all commercial, industrial and retail gen- eral area lighting applications. Industrial reflectors direct 100% of the illumination down to the work or merchandising areas with- out any lost to un nished or high ceilings.
• Optional apertured re ector: Allow approximately 10% uplight- ing to reduce harsh contrasting with completely dark ceilings.
• Lamps: Utilizes all linear Slimline-T8 single-pin type or linear HO-T8 recessed-double contact type  uorescent lamps. One, two, three, or four-lamp cross sections.
• Length/Lamps: 4Ft/44W-HO-T8; 6Ft/65W-HO-T8; 8Ft/59W-SL-T8; 8Ft/ 86W-HO-T8. Other lamps on request.
• Ballasts Slimline-T8: Electronic instant start, normal light output, high power factor, THD less than 10%. Multi-volt op- erates a range from 120V-277V, 50HZ-60HZ. Optional per- formance: high light output.
• Ballasts HO-T8: Electronic rapid start, normal light output, high power factor, THD less than 10%. Multi-volt operates a range from 120V-277V, 50HZ-60HZ. Dedicated voltages, 120V-60HZ or 277V-60HZ available for two-86W-HO-T8 lamps only. Inquire for all low temperature installations.
4-Lamp Unit
• Optional wiring: Two ballasts for dual circuitry. Tandem-in-line wiring. Single or dual circuit quick connect plug through wiring harnesses.
• Emergency battery back up: Integrated pack ranges from 675-lumen output up to 1400 lumens. Varies with lamp type.
• Housings:Dieformed20GAgaugecoldrolledsteel.Re ectors have multiple bends and edge return  anges for maximum strength and rigidity. One 8Ft. re ector used on 8FT  xtures. End plates welded into place. Socket bridges permanently riveted to housing. Suf cient knockouts provided on  xture back and ends make installations easy. White enamel  nish provides a minimum re ectivity of 87%.
• Sockets: Spring loaded plunger type sockets.
• Optional accessories: Ship separately; Wireguards, V hangers, stem sets, cable sets. Wired-in; GLR or GMF fusing, 120V 18/3-SJT cord and plug set, 120V 16/3-SJT cord and NEMA L5-15P twist-lock plug set, 277V 16/3-SJT cord and NEMA L7-15P twist-lock plug set, various occupancy sensors.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.
Fixture Type: Job Information:
MIE4W SERIES
Linear Slimline-T8 HO-T8 Fluorescent Multi-Lamp Heavy Duty Industrial Luminaire
140 MERCURY LIGHTING FLUORESCENT
11/10


































































































   138   139   140   141   142