Page 150 - Mercury Lighting | Fluorescent Catalog
P. 150

• Speci cation grade, heavy-duty linear T8  uorescent open lamp industrial type luminaire. Extra wide deep symmetrical re ector shields and controls the lamp output. Turret style lamp holders protect lamps from vibrations and other envi- ronmental factors.
• Applications: Use for all industrial, commercial, and retail general area lighting applications. Industrial re ector directs 100% of the illumination down to the work or merchandising area without any lost to un nished or high ceilings.
• Optional apertured re ector: Allows approximately 10% uplighting, which reduces harsh contrasting with a com- pletely dark ceiling. Fills the volume of space more evenly making it a more comfortable environment.
• Lamps T8: Utilizes all linear T8 bi-pin type  uorescent lamps. Two, three, or four-lamp cross sections.
• Length/Lamps: 4Ft./32W-T8; 8Ft./32W-T8 tandem lamps. Other T8 lamps on request.
• Ballasts T8: Electronic instant start, high power factor, THD less than 10%. Low ballast factor (.78bf), normal ballast factor (.88bf), or high ballast factor (1.20bf) as speci ed. Optional T8 ballasts; programmed rapid start, Lutron or Advance dimming ballasts as speci ed. Up to 4-lamps per ballast is standard.
• Voltage:Multi-voltoperatingarangeof120V-277V,50HZ-60HZ is standard.
• Optionalwiring:Twoballastsfordualcircuitry.Tandem-in-line wiring. Single or dual circuit quick connect plug through wiring harnesses.
Wire Guard 10% Uplight Re ector
• Emergency battery back up: Integrated pack ranges from 500-lumen output up to 1400 lumens. Varies with lamp type.
• Housing: Die formed code gauge cold rolled steel. Re ectors have multiple bends and edge return  anges for maximum strength and rigidity. Re ectors attach with two wing nuts for easy installations and maintenance. Two 4Ft. re ectors and supplied aligners used on 8Ft.  xtures. End plates, supplied with screws, quickly convert to snap-in continuous row joiners for uninterrupted wireway. Socket bridges per- manently riveted to housing. Suf cient knockouts provided on  xture back and ends make installations easy. White polyester powder coating provides a long lasting highly re ective  nish.
• Sockets: Spring loaded plunger type bi-pin encased in a turret can.
• Installations: Suitable for individual or continuous row mounting. May be surface mounted or suspended on stems, cables, or rods.
• Optionalaccessories:Shipseparately;Wireguards,Vhangers, stem sets, cable sets. Wired-in; GLR or GMF fusing, 120V 18/3-SJT cord and plug set, 120V 16/3-SJT cord and NEMA L5-15P twist-lock plug set, 277V 16/3-SJT cord and NEMA L7-15P twist-lock plug set, various occupancy sensors.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.
Fixture Type: Job Information:
Linear T8 2-, 3-, 4-Lamp Fluorescent Heavy Duty Industrial Luminaire

   148   149   150   151   152