Page 160 - Mercury Lighting | Fluorescent Catalog
P. 160

• Special application M501 series speci cally designed for parking garages and related facilities. Linear T8  uorescent ballast and lamp technologies, advanced optics and ultra-high re ecting materials are built into a Euro-designed enclosed and gasketed wet location luminaire.
• Most garages are often considered as places that are dimly lit, dirty and cold, and somewhat dangerous. The challenge therefore is to deliver a better visual environment while balancing the energy needs to do this.
• Visual environment: Engineered internal re ector system delivers a very wide spread of light for excellent vertical illumination. An up light component above the 90-degree zone brightens the ceiling. This creates a very comfortable environment making people feel safe and secure. Allows for easier driving and navigating through the garage. With low ceiling heights in most garages, this is not usually achieved with alternative types of luminaires.
• Energy savings: Most garages operate their lighting system 24/7. The combination of select T8 ballasts and lamps in this high lumen package will lower energy consumption.
• Lamp and ballast technology features: Up to 30,000-hour lamp life, highest energy savings, zero degree F starting temps, instant on/instant re-strike, sound rating a quiet “A”, 93% lumen mainte- nance, 3000K, 3500K, and 4100K color temperatures, 82 CRI.
• Lamps/Lengths: Two-lamp cross section, T8 linear  uorescent 32W-T8 or as specified. Modules; 4Ft/2-lamp or 8Ft/4-lamp tandem.
• Fiberglass housing: Compression molded in one-piece of non- conductive, non-corrosive, and self-extinguishing 5V-A  berglass reinforced polyester. A poured continuous gasketing permanently bonds and  lls perimeter channel where upon latching, the diffuser and housing form a liquid tight seal. Rated IP65 or higher for full pro- tection from dust and water intrusion. Permanently  nished in a pearl white color that never needs painting or re nishing.
Linear T8 Fluorescent Garage Lighting Euro-Design Enclosed and Gasketed Wet Location UL Listing
Fixture Type: Job Information:
• Diffusers: Optically clear injection molded from 100% impact-re- sistant virgin acrylic plastic. Frosted ends inhibit glare to the driver when luminaire is correctly positioned in a parallel direction with the  ow of traf c. Optional; full frosted diffuser inhibits lamp imaging and glare while offering maximum light transmission. Smooth outside surface is resistant to dirt accumulation and bacterial growth and is easily cleaned.
• Latches: Unbreakable polycarbonate with cam action and self-locking feature to stay closed without hardware. Optional; stainless steel latches. Optional; tamperproof screws.
• Heavy gauge steel-wiring tray: Tethered to housing, contains the ballast, sockets, and all wiring on an easy-to-handle one- piece component. Unique metal locking devise system allows tray to hinge open or lock closed for easy one-person wiring and installation. Tray is  nished in a white polyester powder coating.
• Opticalre ectorsystem:CADdesignedforverywidedistribution to maximize the performance in parking garages and similar facilities, most which have very low ceiling heights. Fabricated from Miro-4 enhanced specular aluminum with a 95% re ectivity.
• Ballasts T8: High ef ciency electronic instant start, high power factor, THD less that 10%. Optional; programmed rapid start. Low ballast factor (.78bf), normal ballast factor (.88bf), or high ballast factor (1.20bf) as speci ed. Up to 4-lamps per ballast is standard, (8ft. tandem units). Multi-volt operates a range from 120V-277V, 50HZ-60HZ.
• Emergency battery back-up: Integrated pack, vented housing, UL damp label only.
• Installations: A 7/8” hole in each end for surface conduit entry and continuous feeds. Liquid tight plugs supplied. Weather- proof hubs supplied by others.
• Mounting: Mount individually or continuous. Various topside embossments contain drill points for job site mounting options. Proper sealing will maintain wet location status.
• Optional hangers: Stainless steel “slide grip” style hanger brackets allow easy mounting without drilling housing. Hook under diffuser anywhere along length of housing.
• UL and CUL listed 1598 and bears a UL wet location label. IP67 tested per IEC 60529, edition 2.1 and passed. Union made and labeled.
Optically Clear Diffuser/ Frosted Ends

   158   159   160   161   162