Page 186 - Mercury Lighting | Fluorescent Catalog
P. 186

Fixture Type: Job Information:
16-8 SERIES
Fluorescent Recessed Wall Wash Luminaire Nominal 8" Wide
SPECIFICATIONS:
• Architectural recessed luminaire featuring a computer designed precision optical system. Delivers a dynamic asymmetric pattern of illumination for dedicated wall washing and accent lighting. Vertical wall surfaces receive a uniform pattern of illumination from top to bottom with no visible horizontal cut-off lines.
• Perimeter lighting creates a more open and comfortable space, increasing productivity and generating a feel-good attitude. Merchandise looks better leading to increased sales volume.
• Precision optical system: Three-component system, fabricated from semi-specular or optional full specular low-iridescent anodized aluminum, completely  lls the entire luminaire interior. A lower kick type re ector compliments a continuous upper scoop type re ector  nished off with two end re ectors.
• Applications: Wall washing and perimeter lighting, accent and display lighting, and illuminating signage and information boards.
• TT5 Lamps: Twin tube compact  uorescent lamps; 40W- TT5, 50W-TT5, or 55W-TT5. Two of these lamps end-on-end on all 4Ft. luminaires.
• T5 Lamps: Linear  uorescent lamps; 2Ft. 14W-T5 or 24W-HO-T5, 4Ft. 28W-T5 or 54W-HO-T5. One-lamp cross sections.
• T8 Lamps: Linear  uorescent lamps; 2Ft. 17W-T8 or 4Ft. 32W-T8. One-lamp cross sections.
• Housings: Fabricated from code grade heavy gauge or optional 20GA. cold rolled steel. Ends and housing parts are securely riveted into place. Ballast located above upper scoop reflector, removable with two screws. Reflector removal not needed for normal lamp maintenance. Steel housing parts are finished with high quality white enamel paint.
• Ballasts TT5: Electronic instant start, normal light output, high power factor, THD less than 20%. Optional TT5 performances: rapid start circuit, THD less than 10%. Advance or Lutron dimming as speci ed. Most TT5 ballasts are standard as multi-volt, 120V-277V 50HZ-60HZ. Dedicated voltage as needed.
• Ballasts T5: Electronic programmed start, normal light output, high power factor, THD less than 10% most ballast/lamp combinations. Advance or Lutron dimming as speci ed. Most T5 ballasts are standard as multi-volt, 120V-277V 50HZ-60HZ. Dedicated voltage as needed.
• Ballasts T8: Electronic instant start, normal light output, high power factor, THD less that 20%. Optional T8 performances: rapid start circuit, high light output, low- watt, THD less than 10%. Advance or Lutron dimming as speci ed. Most T8 ballasts are standard as multi-volt, 120V-277V 50HZ-60HZ. Dedicated voltage as needed.
• Emergency battery back up: Integrated pack ranges from 450-lumen output up to 1350 lumens. Varies with lamp type.
• Installations: Designed to  t NEMA Type G lay-in acoustical grid ceiling systems, 1" or 9/16" grid, having longitudinal runners 9" on center. Adjustable T-bar hangers, attached to each end, secure over the top of the T-bar. End-to-end mounting requires removal of hanger and luminaires to be secured together. Auxiliary hanging supports are suggested and may be required by state and local building and  re codes. A quick wiring access plate is provided for easy installations. Suf cient knockouts are provided for all electrical connections.
• Flangekits:Optional angekitsareavailableformounting in  nished sheet rock type ceilings.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.
186 MERCURY LIGHTING FLUORESCENT
07/10


































































































   184   185   186   187   188