Page 198 - Mercury Lighting | Fluorescent Catalog
P. 198

Fixture Type:
Fixture Type: Job Information:
Job Information:
M2000 SERIES
Flood and Sign Fluorescent Luminaire Damp Location T5 or T8 Lamping
SPECIFICATIONS:
SPECIFICATIONS:
• Parabolic shaped extruded aluminum  ood luminaire for indoor or outdoor protected applications. Linear  uorescent T5 or T8 light sources achieve uniform linear illumination with little vertical graduation. Mount individually or in continuous rows for unbroken lines of illumination.
• Engineered and designed to be corrosion-free with sealed- tight parts and strategic gaskets. When used outdoors, must be installed in areas protected from direct weather conditions. Will withstand indirect moisture, insect invasions, and dirt accumulation. CSA listed for damp locations.
• Supported by rigid conduit supplied by others and is capable of rotating 360 degrees for desired aiming. Integral ballasts are supplied with T5 lamping. Remote ballasts are required for T8 lamping. Ballast boxes are available.
• Applications: Lighting and illuminating of signs and billboards, product displays and merchandise, and general  ood lighting purposes.
• T5 Lamps/Lengths: Linear 2Ft. 14W-T5 or 24W-HO-T5; 3Ft. 21W-T5 or 39W-HO-T5; 4Ft. 28W-T5 or 54W-HO-T5. One or two-lamp cross sections. Tandem lamping for 6Ft. and 8Ft. luminaires.
• T8 Lamps/Lengths: Linear 2Ft. 17W-T8; 3Ft. 25W-T8; 4Ft. 32W-T8. One or two-lamp cross sections. Tandem T8 not available.
• Diffusers: Acrylic smooth clear diffuser allows maximum light transmission while offering a barrier to the elements. Acrylic smooth white is optional and hides lamp image. Both diffusers are extruded in one-piece. Two aluminum retainers hold diffusers tightly in place or remove easily for lamping access.
• Housings: Extruded aluminum .062” thick, parabolic shaped for peak performance. Internal wireway along the housing back for all wiring to pass through. Integrated diffuser grooves along the sides form a positive moisture barrier. Die-cast aluminum end caps permanently riveted onto the housing complete the seal.
• Junction boxes: Two heavy gauge die cast aluminum boxes are supplied with neoprene gaskets and aluminum hardware. Each box has a gasketed access plate for entry to electrical splices. Boxes attach to rigid conduit and allow luminaire rotation. One box can support two units for continuous row mounting.
• Finish: Housing is  nished with a white powder coating inside and out. End caps and junction boxes have their natural aluminum color with a diffuse anodized  nish.
• Ballasts T5: Integral ballast, electronic programmed start, normal light output, high power factor, THD less than 10% most ballast/lamp combinations. Multi-volt operates a range from 120V-277V, 50HZ-60HZ. Minimum starting temperature 0 degree F.
• Ballasts T8: Remote ballast only. Electronic instant start, normal light output, high power factor, THD less than 10%. Multi-volt operates a range from 120V-277V, 50HZ-60HZ. Optional T8 performances: rapid start circuit, high light output, low-watt. Minimum starting temperature 0 degree F. Ballasts must be installed in a grounded ballast box or enclosure. A non-weatherproof ballast box is optional. Weatherproof enclosures are commercially available by others. Multiple lamp ballasts may be used to operate two luminaires. Maximum ballast-to-lamp distances apply.
• Installations: Supported by 3/4" 14NP rigid conduit by others. Length to be determined by lighting and  eld conditions. Conduit threads into junction box. Ballasts should be mounted no more than 15Ft away from luminaire.
• CSA listed and bears their damp location label.
20 Audrey Place • Fair eld, NJ 07004 • Tel: 973.244.9444 • Fax: 973.244.9522
www.mercltg.com
198 MERCURY LIGHTING FLUORESCENT 03/08


































































































   196   197   198   199   200