Page 240 - Mercury Lighting | Fluorescent Catalog
P. 240

• General-purpose 4.25” wide linear T8  uorescent open lamp channel. Multiple lamping and ballast choices. Direc- tional re ectors, wire guards, and mounting accessories. Module lengths; 2Ft., 3Ft., 4Ft., 5Ft., 6Ft., and 8Ft.
• Applications: Use for all industrial, commercial, and retail general area lighting applications. Also speci ed for direct and indirect cove and valence lighting in combination with all types of architectural details.
• Lamps T8: Utilizes all linear T8 bi-pin type  uorescent lamps. One, two, or three-lamp cross sections.
• Lengths/Lamps: 2Ft./17W-T8; 3Ft./25W-T8; 4Ft./32W-T8; 5Ft./40W-T8; 6Ft./25W-T8 tandem lamps; 8Ft./32W-T8 tandem lamps. Other T8 lamps on request.
• Ballasts T8: Electronic instant start, high power factor, THD less than 10%. Low ballast factor (.78bf), normal ballast factor (.88bf), or high ballast factor (1.20bf) as speci ed. Optional T8 ballasts; programmed rapid start, Lutron or Advance dimming ballasts as speci ed. Up to 4-lamps per ballast is standard.
• Voltage:Multi-voltoperatingarangeof120V-277V,50HZ-60HZ is standard.
• Optionalwiring:Twoballastsfordualcircuitry.Tandem-in-line wiring. Single or dual circuit quick connect plug through wiring harnesses.
• Emergency battery back up: Integrated pack ranges from 500-lumen output up to 1400 lumens. Varies with lamp type.
P1 or P2 Plug Thru Clamp Hanger V-Hanger Quick Connect Feature.
(Shown with end plate
as joiner)
Linear T8 1-, 2-, or 3-Lamp Fluorescent Wide Channel Luminaire
Fixture Type: Job Information:
• Housing: Die formed from code gauge cold rolled steel. End plates quickly convert to snap-in continuous row joiners for uninterrupted wireway. Easy install socket plates have snap-in action. Wireway covers snap on or off for easy in- stallation and maintenance. Optional quarter-turn fasteners for tight coves or added security. Suf cient knockouts are provided on the back and ends for all electrical connections. Baked white enamel  nish provides a minimum re ectivity of 87%. Optional 20GA housing is available.
• Sockets: 1/4 twist bi-pin or optional rotary locking type.
• Installations: Suitable for individual or continuous row mounting. May be surface mounted or suspended on stems, cables, or rods.
• Optionalre ectors:Forshieldinganddirectionallightpatterns; Asymmetric, symmetric, direct-light designs. White enamel  nish or optional enhanced specular aluminum which has a 95% re ectivity. Custom shapes available.
• Optional accessories: Ship separately; Wire guards, clamp hangers, V hangers, stem sets, cable sets. Wired-in; GLR or GMF fusing, 120V 18/3-SJT cord and plug set, 120V 16/3-SJT cord and NEMA L5-15P twist-lock plug set, 277V 16/3-SJT cord and NEMA L7-15P twist-lock plug set, various occupancy sensors.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.
Wire Guard

   238   239   240   241   242