Page 244 - Mercury Lighting | Fluorescent Catalog
P. 244

• Speci cation grade, heavy-duty linear T8  uorescent open lamp luminaire. One-piece welded 20GA housing meets NYC code and stands up to vibrations and other environmental factors.
• Applications: Use for all industrial, commercial, and retail general area lighting applications. Also speci ed for direct and indirect cove and valence lighting in combination with all types of architectural details.
• Lamps: Utilizes all linear T8 bi-pin type  uorescent lamps. One, two, three, or four-lamp cross sections.
• Length/Lamps: 2Ft/17W-T8; 3Ft/25W-T8; 4Ft/32W-T8; 6Ft/25W-T8 tandem lamps; 8Ft/32W-T8 tandem lamps. Other T8 lamps as speci ed.
• Ballasts T8: Electronic instant start, normal light output, high power factor, THD less that 10% most ballast/lamp combinations. Optional T8 performances: rapid start cir- cuit, high light output, low-watt. Up to 4-lamps per ballast is standard. Multi-volt operates a range from 120V-277V, 50HZ-60HZ. Lutron or Advance dimming ballasts as speci ed.
• Optional wiring: Two ballasts for dual circuitry. Tandem- in-line wiring. Single or dual circuit quick connect plug through wiring harnesses.
• Emergency battery backup: Integrated pack ranges from 500-lumen output up to 1400 lumens. Varies with lamp type.
Linear T8 Fluorescent 1-, 2-, 3-, or 4-Lamp Heavy Duty Channel Luminaire
Fixture Type: Job Information:
• Housing: Die formed from 20GA gauge cold rolled steel. End plates welded into place. Socket bridges permanently riveted to the housing. Wireway covers attach with wing nuts. Two covers used on tandem-lamp units. Suf cient knockouts are provided on the back and ends for all electrical connections. Post painted white enamel  nish provides a minimum re-  ectivity of 87%.
• Sockets: 1⁄4 twist bi-pin or optional rotary locking type.
• Installations: Suitable for individual or continuous row mount- ing. May be surface mounted or suspended on stems, cables, or rods.
• Optional re ectors: For shielding and directional light patterns standard and custom shapes and materials available upon request.
• Optional accessories: Ship separately; Wire guards, V-hangers, stem sets, cable sets. Wired-in; GLR or GMF fusing, 120V 18/3-SJT cord and plug set, 120V 16/3-SJT cord and NEMA L5-15P twist-lock plug set, 277V 16/3-SJT cord and NEMA L7-15P twist-lock plug set, various occupancy sensors.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.
4-Lamp Detail

   242   243   244   245   246