Page 308 - Mercury Lighting | Fluorescent Catalog
P. 308

• Architectural linear  uorescent luminaire with a compact six-inch square pro le. Five standard lengths can be used in individual applications or in continuous runs. Provides controlled direct down-light illumination utilizing linear T5 or T8  uorescent light sources. A complete menu of available diffusing media, lamping choices, and ballast options is featured. Specify the appropriate combinations for the application and desired performance needed.
• Optional matching wall-mount version is available. Can be used in either the direct down-lighting position or turned over for all indirect up-lighting. Optional wall mount brackets space the luminaire off the wall.
• Optional slotted top version available. When suspended from the ceiling provides a 10-12% up-lighting component to the ceiling.
• Applications: Use in commercial, retail, of ce and school environments.
• T5 Lamps: Linear 4Ft. 28W-T5 or 54W-HO-T5; 3Ft. 21W-T5 or 39W-HO-T5, 2Ft. 14W-T5 or 24W-HO-T5. One, two, or three-lamp cross sections.
• T8 Lamps: Linear 4Ft. 32W-T8; 3Ft. 25W-T8; 2Ft. 17W-T8. One, two, or three-lamp cross sections.
• Housings: Die formed code grade heavy gauge cold rolled steel with end caps welded into place for strength, uniformity and appearance. Half-end option allows for continuous run of the louver or diffuser as it passes from  xture-to- xture. Plain-end option eliminates the knockout if not needed for electrical entry.
• Finish:Allsteelhousingpartsarepaintedafterfabrication with a white powder coating. Provides a re ectivity of 90% or greater. Optional colors on request.
Linear Fluorescent 6X6 Surface or Suspended Module
Fixture Type: Job Information:
• Louvers and diffusers: See ordering data for complete list of available media. Parabolic cross blades in semi- specular or white aluminum are standard shielding media. Acyrlic prismatic pattern #12 is standard diffusing media.
• Ballasts T8: Electronic instant start, normal light output, high power factor, THD less that 20%. Up to 4-lamps per ballast is standard. Optional T8 performances: rapid start circuit, high light output, low-watt, THD less than 10%. Lutron or Advance dimming ballasts as speci ed. Dedicated voltages; 120V-60HZ or 277V-60HZ. Optional multi-volt operates a range from 120V-277V, 50HZ-60HZ, and is less than 10% THD.
• Ballasts T5: Electronic programmed start, normal light output, high power factor, THD less than 10% most ballast/lamp combinations. Up to 2-lamps per ballast is standard except; up to 4-lamps per ballast is standard for 54W-HO-T5. Lutron or Advance dimming ballasts as speci ed. Most T5 ballasts are standard as multi-volt, 120V-277V 50HZ-60HZ.
• A multiple lamp ballast operating the maximum number of lamps is standard. For split circuits and switching specify two-ballast option.
• Emergency battery back up: Integrated pack ranges from 500-lumen output up to 1400 lumens. Varies with lamp type.
• Installations: Designed for individual or continuous runs. Surface mount or suspended from ceilings on auxiliary hanging hardware. Suf cient knockouts are provided on the back of the housing for all electrical connections.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.

   306   307   308   309   310