Page 328 - Mercury Lighting | Fluorescent Catalog
P. 328

SPECIFICATIONS:
• High performance linear T8 fluorescent luminaire speci cally designed for all patient bed-lighting applications. Architecturally pleasing appearance looks as good as it performs. Use over beds in hospitals, nursing homes, and extended care facilities. Dual circuits allow patients or health care provider individual control over the direct down lighting and indirect uplighting components. Down lighting provides task illumination for patient reading or medical examination. Up lighting provides ambient room general illumination. Switching options available.
• Two, three, or four-lamp cross sections, T8 linear  uorescent. Three-lamp available either two-up/one-down, or one-up/ two-down.
• Two-lamp depth: 4-3/8”. Three and four-lamp depth: 5-5/8”.
• Length/Lamps: 2FT/17W-T8, 3FT/25W-T8, 4FT/32W-T8.
• Housings: Die formed from code grade cold rolled steel with galvanized steel ends riveted into place. An internal ballast cover/re ector is easily removed for wiring access. A front baf e shields and controls light into its down and up lighting components as a center lamp divider separates them. One-piece end caps overlap and secure the diffuser and front baf e. Back knockout cluster for direct attachment to a recessed junction box. Finished with a high quality white enamel paint offering an 87% re ectivity. Optional  nishes on request.
MP65-PB SERIES
Linear T8 Fluorescent Patient Bed-Lighting
Fixture Type: Job Information:
• Diffusers: A one-piece clear diffuser is extruded from 100% virgin acrylic material with inside linear prisms along the sides. Provides superior performance, light control, and long lasting service.
• Ballasts: Two ballasts for dual circuits is standard, one ballast on request. Electronic instant start, normal light output, high power factor, THD less that 20%. Optional T8 performances: rapid start circuit, high light output, low- watt, THD less than 10%. Dedicated voltages; 120V-60HZ or 277V-60HZ. Optional multi-volt operates a range from 120V-277V, 50HZ-60HZ, and is less than 10% THD.
• Switching and Electrical Options: Single circuit pull chain switch, dual circuit 4-position pull chain switch, and grounded outlet. All options are for 120V use only. Either circuit may be controlled by room switches.
• Patient Night Light Option: 7W incandescent externally mounted.
• Emergency Battery Back Up: Integrated pack ranges from 550-lumen output up to 1400 lumens.
• Installations: Suitable for individual horizontal mounting on walls.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.
328 MERCURY LIGHTING FLUORESCENT
12/08


































































































   326   327   328   329   330