Page 348 - Mercury Lighting | Fluorescent Catalog
P. 348

SPECIFICATIONS:
• Vandal proof luminaire using the latest T5  uorescent lamp and ballast technologies. Features an indestructible 16GA. steel housing, an unbreakable clear polycarbonate prismatic diffuser, and six tamperproof screws.
• Designed to withstand severe cases of vandalism and abuse.
• Applications: Schools, public housing complexes, parking garages, hospitals, police precincts, recreation facilities, and all other medium to maximum-security locations.
• One or two-lamp cross sections, T5 or HO-T5 linear  u- orescent.
• Lamps/Nominal Lengths: 2FT/14W-T5 or 24W-HO-T5; 3FT/21W-T5 or 39W-HO-T5; 4FT/28W-T5 or 54W-HO-T5.
• Housings: Fabricated from 16GA. (.062”) cold rolled steel. End caps are drawn with a 5/8”  ange on three sides to overlap and secure diffuser. Finished with a high quality white powder coating.
• Tamperproof screws: Three specially designed screws hold each end cap securely in place. Corresponding screwdriver required and is cataloged. Optional standard type screws available when tamper proo ng not needed.
• Diffuser: Extruded from clear unbreakable polycarbon- ate material in a.125" thickness. Treated with ultra-violet inhibitors. Sharp linear prisms along diffuser side pan- els, evenly spaced conical prisms along the bottom pan- el. Continuous tongue and groove  t along diffuser edges keeps it secure.
End Detail
348 MERCURY LIGHTING FLUORESCENT
MP65VP SERIES
Linear T5 Fluorescent Indestructible Vandal Proof Luminaire
Fixture Type: Job Information:
• Optional diffuser: Extruded from clear high impact acryl- ic-DR material for minimum-security jobs where the use of polycarbonate material may not be desired.
• Ballasts T5 and HO-T5: Electronic programmed start, normal light output, high power factor, THD less that 10% most ballast/lamp combinations. End-of-lamp life safe- ty shut down feature. Multi-volt operates a range from 120V-277V, 50HZ-60HZ.
• Emergency battery back up: Integrated pack ranges from 500-lumen output up to 1600 lumens. Varies with lamp type. Test switch and light are internally mounted for se- cure protection of these components. External mounting available.
• Installations: Surface mount individually, ceiling or wall. Suf cient knockouts and holes for direct attachment to a junction box. Four additional 1/4" mounting holes for secure anchoring. On request, row mounting, surface conduit entry, and surface mount junction box set-ups available.
• UL and CUL listed 1598 and bears their label. Suitable for dry locations or optional damp locations with UL Damp Label. Union made and labeled.
05/10


































































































   346   347   348   349   350